Procedure for Installing an Illuminated Sign

Site Inspection and Preparation
Evaluate the installation location, check the wall or structure for stability, and confirm that it can support the weight of the sign.

Marking and Measurements
Use a level and measuring tape to mark the exact placement of the sign, ensuring proper alignment and visibility.

Electrical Preparation
Turn off the power supply. Install the necessary electrical connections, including wiring and power outlets, according to local safety codes.

Mounting the Sign
Secure the frame or mounting brackets to the wall or structure. Carefully lift and attach the illuminated sign to the brackets.

Wiring and Connections
Connect the sign’s electrical wiring to the power source. Make sure all connections are properly insulated and safe.

Testing the Sign
Turn on the power and check that the lighting system functions correctly. Inspect for even illumination and verify there are no flickering or loose connections.

Final Adjustments and Finishing
Ensure the sign is straight, stable, and firmly mounted. Seal any gaps to protect against water or dust.

Safety Check and Cleanup
Confirm that the installation complies with safety standards. Clean the area and remove any installation debris.